Milled-in underfloor heating in Apeldoorn
We reach Apeldoorn from Arnhem in just over half an hour via the A50. We have milled there in homes as well as commercial buildings: from a timber-frame house with dry-screed boards to a complete industrial hall. Milled-in underfloor heating in Apeldoorn: no loss of height, low-dust and often in one day.
- Drive from Arnhem: approx. 35 min.
- Reply within 2 hours
- VCA & GPi certified

Homes and floors in Apeldoorn
Apeldoorn is a spacious town with many detached and semi-detached homes. Berg en Bos, De Parken and Kerschoten have the larger pre-war and 1930s houses, often with a wooden ground floor above a crawl space. We don't mill into the wood: we fit Fermacell or Knauf boards and mill the pipes into those. If a sand-cement floor was poured later, we simply mill into that.
De Maten, Zevenhuizen, Zuid and Osseveld-Woudhuis are the large 1970s–90s districts with a sand-cement screed on concrete. There milling is the fastest route to a warm floor: neat channels, pipe at 100 mm centres and the floor walkable again the same day. In apartments on the Deventerstraat or in the centre we find concrete floors — we mill those too, quoted individually.
Around Apeldoorn there is a lot of timber construction and new build (Zuidbroek, Groot Zonnehoeve). For new builds or extensions we lay the underfloor heating before the screed is poured: stapled onto the insulation, tied on mesh or on studded panels. If you opt for a heat pump, we match the pipe spacing to it straight away.
Districts where we regularly work
Projects in and around Apeldoorn



What does milling cost in Apeldoorn?
In Apeldoorn we charge the same prices as in Arnhem: from €35 per m² excl. VAT (€42.35 incl. VAT) for sand-cement, Fermacell and Knauf Brio, with a minimum charge of €1,200 excl. VAT per job. Concrete, anhydrite and tiles are quoted individually after a short inspection. The price includes milling, pipe, manifold and connecting and pressure-testing the system.
See all rates and worked examples →Frequently asked questions from Apeldoorn
Do you also mill in commercial buildings in Apeldoorn?
Yes. We milled a complete industrial hall in Apeldoorn; large areas are planned in consultation and milled with several machines at once.
My 1930s house in De Parken has a wooden floor — what then?
We fit dry-screed boards (Fermacell or Knauf Brio) on the wooden boards and mill into those with 14 mm pipe. The timber structure stays intact and you only lose a few centimetres.
What does milling in underfloor heating cost in Apeldoorn?
From €35 per m² excl. VAT for sand-cement and dry-screed boards, minimum €1,200 per job. No call-out charge within our working area.
Underfloor heating in Apeldoorn? Request a quote
Fill in the quick form or call us. We reply within 2 hours, visit for an inspection and you receive a tailored quote — no obligation.
Also nearby:
We'll call or email you within 2 hours with a price.
Ready for a warm floor?
Request a no-obligation quote — reply within 2 hours.
Request a free quote →